SKU OCC-RIPPLED-EXHAUST-PIPE · Made in house
Rippled Exhaust Pipe
1 selection required. Add to cart unlocks once it is made.
Materials and construction
We at Old’s Cool Choppers are now offering vintage styled rippled exhaust tubing made right here in the Bronx New York by industry professionals and is currently offered in 4 different sizes of ripples 1”5/8, 1”3/4, 1”7/8, & 2”
Our ripple pipe comes in 24”inch long sections with approximately 20” of ripples, these and is made from .065 wall mild steel exhaust tubing.
If you are interested in any other Custom Specific Pattern, Just reach out and lets design your own.
We often get asked about the best way to instal a section seamlessly into an exhaust Here are specific directions on how to do it the same way we do here on our own bikes
First we will start with determining the length of ripple section we want to install. Then we will cut down the rippled tubing in the center of the high part of the ripple.
Cutting the ripple pipe in the center of the middle of the ripple, this will allow for the splice to look seamless once welded and sanded down.

With your pre-existing exhaust in place on your mock-up motor, or carefully on your daily rider, take a piece of 90 ⇲ angle steel and hold it tight against the pipe marking a straight line on the exhaust system, then do the same to your predetermined cut down length or ripple pipe. Once you cut your small section of straight tubing out, the lines on the ripple pipe and exhaust system will help you relocate the pipes back to the stock position it was in before being the cut.

If the system has coating on it, be sure to sand away any chrome or ceramic coat at least a 1/4 inch from the weld surface and clean the inside as well. We have a small fixture for holding the exhaust in place so it’s straight again before we tack it up, but the piece of angle and some clamps will do the same job.or the next size smaller exhaust pipe as a splicing tool inside the pipe (approximately) 1 inch long (sold separately on the site)

Believe me, your chrome guy will be pissed,

We hope this little bit of inside info will help you build the exhaust of your dreams, and remember we can make up any size tubing you may need for your systems so please just hit us up for questions or custom orders and be sure to check us out at www.oldscoolchoppers.com, like us on Facebook and follow us on Instagram. Don’t forget- -buy American and Support the Source
Technical specification
| Shipping class | long-parcel |
|---|
Explore more of our parts
-
80-78912, CS-4155
BAFFLE 1.50 or 1.75 o.d exhaust pipe
Price range: $6.94 through $6.99 Select options -
-
OCC-PIPES-HIGHLEFT
Exhaust Pipes Left Side High Pipes - Triumph Unit 650 750 Motorcycles
$279.99 Add to cart -
80-62391. 71-0216
Header Pipe Exhaust Clamp Set for Triumph unit and pre unit motorbikes
Price range: $52.49 through $59.50 Select options


Reviews
There are no reviews yet.