Old's Cool Choppers
Universal throttle cable kit
The Conduit is steel covered with black PVC and the inner is Teflon and the wire is galvanized.
One end of the inner wire is fitted with a carb nipple.
The opposite end will need to be cut to length and the required nipple soldered.
The ferrules and adjusters are a tight fit.
You will need a basic soldering kit and basic soldering skills to solder the nipple into place.
Universal Throttle Cable Kit Includes: 1.35 meters (4.4 feet/4 feet 4.8 inches/52.8 inches) of 6mmOD black PVC coated, spiral wound, Teflon lined outer conduit 1.6 meters (5.2 feet/5 feet 3 inches/63 inches) of 1.5mm OD galvanized steel wire (7 x 7 strand) 2 ferrules, 5mm OD nose 2 ferrules, 6.5mm OD nose 1 6mm x 1.00 x 32mm mid-adjuster 1 6mm x 1.00 x 32mm adjuster screw with nut2 neoprene adjuster boots 1 brass carburetor nipple, 3mm DIA x 3mm (1.9mm bore) 1 brass barrel nipple, 5mm DIA x 7.5mm (1.9mm bore) 1 brass barrel nipple, 5.75mm DIA x 5.5mm (1.4mm bore) 1 brass barrel nipple, 6mm DIA x 4.2mm (1.7mm bore) 1 brass barrel nipple, 6mm DIA x 8mm (2.1mm bore) 1 brass barrel nipple, 6mm DIA x 10mm (2.1mm bore) Made in the USA